DX8000 – Set up Wi-Fi

 

Set up Wi-Fi

1. From the Main Menu, click the three lines on the top left corner of the screen to access the menu option.
2. From the Menu option, swipe up and press the "Exit" tab on the bottom to go back to the home screen.
3. From the Home Screen, press the "Settings" with the gear icon.
4. Enter password and press "OK".
5. Select the "Network & Internet".
6. Select "WI-FI" to enable Wi-Fi support. Ensure that Wi-Fi is enabled by pressing on the toggle button located on the corner right of the main header.
7. Select the desired Network from "Use Wi-Fi" list.
8. Enter Wi-Fi Password then press "Connect". You can opt to show the password when typing it in by placing a check on the box right beside the [Show password] message.
9. "Connected" status would show once terminal is connected to the Wi-Fi.