Skip to main content

Move/5000 – Setup Wi-Fi

Learn how to access Wi-Fi settings to connect to your device to your local network.

Note: Your device may be a different color but all instructions apply


Setup Wi-Fi

  1. From the Home Screen with the Chase logo, press the Gray [Desktop/Function] key to access the Admin Menu.​
  2. Select Admin Mode.
  3. Enter the Admin Password then press the​ Green [Enter] key.
  4. Select Tetra Admin icon.
  5. Press [3] for Configure Wi-Fi.
  6. Press [1] for Scan Networks.
    1. Terminal will scan for available wi-fi networks and list them according to signal strength.
  7. Tap on the Wi-Fi network that you wish to connect to.
  8. Terminal will ask for Wi-Fi password. Enter the password accordingly on the keypad located on the touchscreen.
    1. Tap on the "ABC" icon on the screen in case the wi-fi password contains letters.
  9. Press the Green [Enter] key to continue.
    1. Terminal will show the message "New Profile OK" if successful.
    2. Terminal will go back to the Admin Menu screen once done.

Other helpful videos